Crashes, Folding Lamp-Posts, Pot-Hole Fillers and Giant Mobile Barriers

 

Media invitation to see innovation in action

Bruntingthorpe, Leicestershire
27 & 28 June

There’s a quiet revolution going on in world of road maintenance and the sight of miles of traffic cones on the motorway could become a thing of the past, thanks to a host of innovations that fix the road without any lane closures.

 

Media are welcome to Traffex Seeing Is Believing, the only event of its kind which allows high-speed crash demos and outdoor showcasing for live road repairs. At the two-day event, visitors will see:

 

Road Rake

All the way from Bondi Beach, Road Rake is an adaptation that gobbles up debris from crashes.  It collects wheels, shredded tyres, bumpers, damaged lights as well as general litter left behind by thoughtless drivers. Kier developed the machine to help tackle the 200,000 sacks of rubbish routinely collected by Highways England which is both costly and dangerous to road workers.  Covering a 4km stretch of road takes approximately two hours – significantly down from average of two to three days by hand and saving about 70-man hours. The cost of collecting one sack of motorway litter is the same as fixing a pothole. Road Rake clears up the junk without the need to close lanes or put workers at risk from fast-moving traffic.

 

Mobile Barrier

The 83-foot Mobile Barrier provides exceptional protection for both road workers and motorists and reduces the severity of incidents in and around work zones. It acts as a physical protection vehicle, absorbing impacts from moving vehicles if struck from the side, and a lorry-mounted crash cushion behind gives further protection from the rear. Mobile Barrier possibilities are being developed to further reduce road worker exposure. The barriers originated in the United States where works zones incursions have led to several fatalities. Highways England and Kier are keen to adopt that learning and further enhance safety measures here in the UK, made possible with support from designated funds.

 

Roadmender

In use on the highway network in the West Midlands, Roadmender not only fixes roads first time in record time, but also makes use of recycled scrap road planings.

Co-ordinating the number of vehicles and equipment required on site for road resurfacing work is a common challenge, as well as keeping roadworks time to a minimum. Kier’s Roadmender was developed to address this. The vehicle allows exact quantities of asphalt to be mixed to the correct temperature and quantity and laid on site. Using this vehicle means more than 3 tonnes of waste a week no longer going to landfill. Projects can be completed in one visit, saving time and cost, and reducing C02 emissions.

 

WJ Guardian System

This bespoke, employee-inspired 18-tonne truck installs road studs. As well as removing vulnerable roadworkers from the carriageway, the system reduces exposure to dust and debris, ensures safer handling of hot materials, increases efficiency and reduces cost. For road-users, it means traffic lanes are fully accessible. The UK has approximately 12 million road studs on the national and local road network, all requiring maintenance or replacement at some point. Normally, road stud installation requires a specialist lorry with a milling rig to straddle the centre line. This process requires a three-man crew with at least two vulnerable workers in the carriageway to carry out the installation.

The WJ Guardian innovative method means that workers do not need to stand and operate equipment, but are protected within the unique safety cell. It has reduced incidents and near misses by 100%.

 

Safety Cam

Safety Cam is an innovative dual camera system which can spot both road workers speeding through construction sites and road users who illegally drive through cones. It is currently being extensively tested across motorways and main A roads managed by Highways England. In the first trials, in the West Midlands, a 50 per cent month-on-month reduction was recorded in road workers driving 10mph above the signed limit through sites. And in Essex the number of roadworks incursions reduced by more than 80%.

 

Truvelo LASERcam 4

A new-style police camera will be on UK roads later this year. LASERcam 4, a mobile speed enforcement camera from Truvelo, combines class-leading laser speedmeter capabilities with high quality video to address a series of driving and criminal offences.

LASERcam 4 delivers performance levels exceeding those previously only seen in bulky tripod-mounted equipment. Additionally, years of intensive development have seen advances in video technology, processing speed, laser performance, and reduced power requirements which are all combined for the first time in LASERcam 4. Demonstrations of LASERcam 4 will take place at the track side throughout Traffex Seeing Is Believing.

 

Valerann Road Studs

“Smart” road studs are wireless, sensory, and provide real-time, high resolution information about everything that takes place on the road. This information is used to detect risks, prevent accidents, optimize intersections, automate traffic control centres, and support connected & autonomous vehicles.

 

Four crash demonstrations

Four live demonstrations will show, for the first time in public, the effects of crashing into a traditional, rigid lamp-post at high speed vs the same crash into a “passive” lamp-post, as well as a low-speed urban crash into a lightweight aluminium signpost. Hinged lamp-post not only fold on impact, but are easier and safer to maintain. Following the demonstrations, visitors are invited to see for themselves the effects of each impact and the performance in each scenario. Even the run-up to the crash is dramatic: the crash car is remotely controlled and guided by a police-style ‘TPAC’ or Tactical Pursuit and Containment manoeuvre.

 

Other innovations being demonstrated include solar powered CCTV cameras currently trialled on the M42 by the motorcycle museum near Birmingham; wearable technology to improve roadworker safety; a robot used to mark out parking bays; and a dot-matrix printer that can mark any image on to the road surface.

 

Highways England is using designated funding, of ring-fenced money from the Road Investment Strategy to support and encourage more innovation from the industry to reduce incidents involving road users and road workers, improve the infrastructure, support sustainable operation, boost new and emerging technology and improve how data and information is captured and processed.

 

In addition to the highly visual outdoor demonstrations and indoor displays, there is a conference with a wide range of experts speaking. Highways England’s innovation and continuous improvement director, Paul Doney, will talk about a new initiative being launched at Traffex Seeing is Believing on 27 June. Kier, a key partner in the event and one of the leading providers of highways management and maintenance services on the UK road network, will outline how technology is driving change on the road network.

 

Media contacts and useful links:

For photos, to arrange TV filming, or for interviews and more information, please contact

Adrian Tatum, Group Content Editor, 01935 374 013

Becky Hadley, Hadstrong 020 7808 7997 becky.hadley@hadstrong.com

 

A library of video clips and images is available to download at: http://www.sib.uk.net/about-the-event/2016-photo-gallery/

Media can register at http://www.sib.uk.net/

http://www.sib.uk.net/about-the-event/outdoor-demonstrations/

http://www.sib.uk.net/about-the-event/indoor-conference/

 

Supported By